Note: A site does not have to be certified to have its profile published on Louisiana Economic Development's interactive sites and building website.

• Size: Between 10 and 25 contiguous, buildable acres, free of impediments to development such as existing structures not appropriate for future commerce, soil contaminants, wetlands, flood plain, protected species and/or cultural resources.Price per Acre: A fixed purchase price or a fixed leasing price per acre for a specified time period is required to certify and publish a site.
• Property Control/Ownership: Control of the site through option, purchase or other legally binding agreement must be obtained and maintained as a condition of certification. It is required that the property can be obtained free and clear of encumbrances.
• Zoning/Land Use: The site must be zoned or otherwise approved for industrial applications. If zoned, a zoning district description and map are required. Only sites suitable for industrial use will be considered. Sites adjacent to significant residential development or other land uses incompatible with industrial activities will not be considered.
• Flood Plain: Between 10 and 25 contiguous, buildable acres must be above the 100 year flood plain. Alternatively, the applicant may provide a formal cost estimate, construction plan and funding source by which construction footprints can be elevated above the plain and meet FEMA standards. 
• Water Supply: For sites under 250 acres, delivery prior to any potential project start-up either by line or by well, a minimum of 50,000 gallons of potable or process water per day.  Sites 250 acres or over must have a water supply equal to 200 times their acreage rounded to the nearest 10,000 gallons.  Thus, a 500 acre site must have a water supply of 100,000 gpd.
  If an existing source of water supply is not available, certification will require submission of 1) an order-of-magnitude cost estimate, 2) a conceptual design and 3) funding source to meet the minimum level of service within a reasonable timetable, typically considered to be 12-18 months.  Typically, a 4” water distribution line is the minimum size (6” or larger preferred) that can deliver the required dynamic pressure at industrial sites.
  Furthermore, there must be adequate pressure and flow at the site to combat fires. If this is not available, the applicant must provide documentation from an engineering firm about how sufficient water will be made available to fight fires.  Note: A wide-spread fire at a 100k ft² manufacturing building will require 1.2 million gallons for a 1 hour fire.
• Sanitary Sewer: For sites under 250 acres, provide a minimum of 50,000 gallons of sanitary sewer capacity in a reasonable time period upon project start-up notification. Sites 250 acres or over must have a sanitary sewer service equal to 200 times their acreage rounded to the nearest 10,000 gallons. Thus, a 500-acre site must have a sanitary sewer supply of 100,000 gpd. If existing sewer capacity is not available to the property boundary, certification will require submission of:
  1) an order-of-magnitude cost estimate,
  2) a conceptual design, and
  3) a funding source to meet the minimum level of service within a reasonable timetable, typically considered to be 12-18 months.
• General Road Access: The roads accessing the site must be able to support vehicles with a maximum gross weight of 83,400 pounds, such as semi-trucks and trailers. If an access road does not exist, certification will require submission of an order-of-magnitude cost estimate, conceptual design and funding source to meet the required access within a reasonable timetable.
• Electricity: Identify service provider or providers that can deliver reliable 3-Phase power service to the site prior to any potential project startup. If existing capacity is not available at the site, certification will require submission of an order-of-magnitude cost estimate, conceptual design and funding source to meet the minimum level of service within a reasonable timetable.
• Natural Gas: Natural gas must be available to the property boundary or available prior to any potential project startup. Typically, a minimum of a 4” distribution line is required with an 8” line preferred. If natural gas is not available, certification will require submission of an order-of-magnitude cost estimate, conceptual design and funding source to meet the minimum level of service within a reasonable timetable.
• Listing: The property owner must agree to have the site published by Louisiana Economic Development on its interactive sites and building website.
• Phase I Environmental Assessment: The site must have undergone a Phase I environmental assessment as a prerequisite for being considered for participation in the certification process. The Phase 1 Environmental Assessment must be less than 5 years old from the date of submission. 
• Remediated Sites: If there are unresolved environmental issues, the site cannot be certified until a No Further Action letter or its equivalent from the Louisiana Department of Environmental Quality (DEQ) is provided. 
• Re-Certification: LED Certified Sites must be re-certified every five years by documenting changes in adjacent land use, right-of-ways, existing structures, zoning, transportation infrastructure, utilities, total available acreage, environmental and cultural conditions, ownership, topography, and any other pertinent changes that impact the marketability of the site. A new application and due diligence will not be required.

The following due diligence action items must be completed for certification.

• Phase I Environmental Assessment: The site must have undergone a Phase I environmental assessment as a prerequisite for being considered for participation in the certification process. The Phase 1 Environmental Assessment must be less than 5 years old from the date of submission. LED will accept two types of Environmental Site Assessments: E1527-13 for all sites, rural, urban and forested, of any size, and E2247-16 for forestlands and rural properties. All older standards will be rejected.
• Wetland and Stream Delineation: Applicants must have a wetland and stream field survey conducted to delineate all wetlands and “waters of the US” on the site. If wetlands and waters of the US will likely be impacted by planned development of the site (i.e., wetlands are in the middle of the site or in areas likely to undergo construction), the applicant must submit the wetlands delineation to the US Army Corps of Engineers for a formal Jurisdictional Determination. This formalizes the wetlands delineation and provides some assurance from the Corps that wetlands are no more extensive than the delineation purports.
  
  Note: Wetlands mitigation is NOT required of an applicant but applicants with wetlands in the prime areas of their site are encouraged to mitigate those wetlands. 
• Topographic Survey and 100/500 year Floodplain Designation: Obtain a suitable interval aerial topographic survey of the site. Demonstrate that the site is either above the 100/500 year floodplain or a site manufacturing pad can be cost effectively constructed to raise the site above the floodplain.
• Preliminary Geotechnical Investigation: Obtain a preliminary geotechnical investigation of the site generally characterizing the site’s soil, rock and groundwater conditions. Substantiate that unfavorable geotechnical conditions do not exist at the site. The geotechnical investigation required for certification should involve no less than 2 and no more than 5 borings spread evenly across the site. More than 5 borings is generally not required, regardless of the size of the site since the goal here is to establish general soil bearing pressures/characteristics. The narrative in the geotechnical report should clearly state the approximate load bearing capacity of a 14” concrete or pipe pile or other similar, commonly used geotechnical support structures used in a major petrochemical plant. It should also estimate the approximate size of spread footings for 2-3 types of industrial structures (tanks, pipe racks, etc.).
  
  Here is LED’s guidance for the required number of borings and depth of borings.
  25-50 acres: two borings, one to 50' and one to at least 30'
  50-250 acres: three borings, on to 100', at least one of the other to 50', and the remaining boring can be drilled to 30'
  250+ acres: five borings, at least one to 100’, at least two others to at least 50', and the remaining borings can be drilled to 30'
  
  As stated above, more than 5 borings for a preliminary geotechnical investigation is generally not advised.
  Note: If the applicant has recent geotechnical data from a project in the immediate vicinity of the site, that data may be deemed acceptable to LED.
  
• Cultural Resources Investigation: Obtain a database research level cultural and archeological investigation of the site from a qualified third party archeologist to document that there are no known cultural resource sites existing on the site. Provide the results of this third party investigation to the State Historical Preservation Office (SHPO) and request a letter from SHPO indicating whether the site is cleared for development or if the site requires a Phase 1 Cultural Resources Assessment. If a clearance letter cannot be obtained from SHPO, then a Phase I cultural resources survey must be performed.
• Endangered Species Investigation: Secure a letter from the Louisiana Department of Wildlife and Fisheries indicating that development on the site will not impact any protected or endangered species on or near the site.
• Railroad Accessibility: If the site can be served by railroad, please provide a brief narrative describing how rail access will be provided. Be sure to indicate if roads, highways, streams, bayous or other water bodies must be crossed. Please include a map as an additional exhibit if the suggested route for access crosses any of the previously mentioned obstacles.
• Utility, Oil/Gas Well and Pipeline Easements and Rights-of-Way: Identify any and all existing easements, utility rights-of-way, well heads, pipelines, etc. on the site that may be potential impediments to fully utilizing the site. Determine if the identified impediments can be cost effectively relocated.
• Roadway Accessibility: A four lane major highway within close proximity of the site is preferred. Determine if there is a cost effective means to obtain right-of-way and construct an access road from the site to the four lane highway. Obtain an order-of-magnitude cost estimate for the access road construction, if needed. The roads accessing the site must be able to support vehicles with a maximum gross weight of 83,400 pounds, such as semi-trucks and trailers.

To qualify for certification, you must complete the pre-application and submit it to LED.

Contact: 
Daniel Michel
225.342.9214

For a printable guide, view the Certified Sites Program Overview.

The EDRED site improvement funds are available to site owners, managers and regional ED Organizations to assist with identified action items needed to improve the marketability of quality sites and qualify for LED site certification. EDRED allows for LED to provide a 75% match for required site improvement work. All sites accepted into the site improvement program are eligible for LED site certification

Requirements include: a clearly defined price range (including an option or MOU for third-party owned sites), and the scope of work in proposals by local firms should be reviewed by LED. Funds will be used for expenses such as site engineering and basic due diligence. These expenses may include: Phase I environmental survey, threatened & endangered species survey, cultural & archaeological survey, preliminary geotechnical survey, wetlands / floodplain delineation, engineering conceptual plans for infrastructure improvements, and other necessary work. A responsible party (site owner, EDO, etc.) must agree to pay the vendor(s) 25% of the total invoice price.

The 25% local match cannot come from EDO Tier 1 funds.

---

Process

• Complete LED certified sites pre-application (NOTE: Site owners are not required to pursue LED site certification but the same due diligence action items apply for EDRED funding as for certification so the site becomes automatically eligible for certification pending completion of the application).
• If approval of the pre-application is received, the site will be added to the work plan and be considered eligible for certification and EDRED funding assistance. 
• The applicant will be notified of the due diligence action items required and be asked to engage appropriate vendors to provide proposals with itemized scope of work and proposed price. 
• LED will approve vendor proposals or suggest revisions. 
• If land owners wish, LED contracted vendors can provide proposals and complete work, or site owners can use preferred vendors.
• Site owners must arrange for and guarantee the funds for the 25% match required by the program.
• Reimbursement of approved site due diligence at 75% of the total cost must be through a Cooperative Endeavor Agreement (CEA) with the state of Louisiana. CEAs are in place with the eight regional economic development organizations. The LED contract vendors also have CEAs in place. (NOTE: Arrangements for reimbursement through an existing CEA must be made before any work is commenced. Site work done prior to the execution of a CEA will not be reimbursed).
• Invoices and all supporting documentation for 75% of the cost of completed due diligence action items should be presented to LED for payment.

---

Requirements

• LED funding requires a pledge to provide the local match: 75% LED/25% local+ Requirements
• Site needs to be on LED work plan 
• Sale price and/or option needs to be secured prior to funding
• Expenditure items need to be on the LED work plan to receive funding. These work items should be identified by LED as a priority. Other work not identified by LED should be funded without the LED match.
• Local entities can select the firm to perform the work or LED can assign the work to an engineering firm with which LED has an existing professional services contract. In any case, LED must review and concur with the scope prior to agreeing to provide the 75% match.
• Local vendors may be asked to subcontract with an engineering firm contracted to LED or work though their regional Economic Development Organization.
• If work is performed by LED contracted firms such as AECOM or CSRS, then a letter of agreement to pay 25% of the total invoice must be provided by a responsible party. The responsible party will have the opportunity to review and approve the scope and price in advance. 

Acadiana Region 
Emile Lege, OneAcadiana

Bayou Region 
Vic Lafont, South Louisiana Economic Council 

Capital Region 
Russell Richardson, Baton Rouge Area Chamber

Central Region 
Dan Purvis, Louisiana Central

Northeast Region
Tana Trichel, Northeast Louisiana Economic Alliance

Northwest Region
Liz Pierre, North Louisiana Economic Partnership

Southeast Region
Gary Silbert, Greater New Orleans, Inc. 

Southwest Region
Gus Fontenot, SWLA Economic Development Alliance

Verification of Site Availability

Site Zoning, Tax Assessment, and Special Economic Development Districts

• Tax millages can be found at the Louisiana Tax Commission.
• Parish assessors can provide information on parcel sizes and current property tax millages applied to the parcel. A list of assessors can be found at the Louisiana Assessors' Association.

Utilities and Infrastructure

Applicants will need assistance from their local offices and providers. You can also download a printable Resource Guide.

• Potable Water Infrastructure 
• Wastewater Infrastructure
• Electricity Infrastructure
• Natural Gas Infrastructure
• Pipelines Maps
• Telecommunications Infrastructure
• Roadway Transportation
• Air Transportation Infrastructure 
• Rail Infrastructure
• Water Transportation Infrastructure
• Geography and Geological Assessment
  - U.S. Geological Survey Quad Map
  - Soils Conservation Service (SCS) Map
  - National Wetlands Inventory (NWI) Map

• FEMA 100-year Floodplain Map
  - LSU AgCenter’s Flood Map Portal
  - Federal Emergency Management Agency (FEMA)

• Environmental Assessment
  - Louisiana Department of Wildlife and Fisheries
    Carolyn Michon, Biologist
    337.735.8734
  - State Historical Preservation Office (SHPO) 
    Rachel Watson, Section 106 Review & Compliance, Division of Archaeology 
    225.342.8165
  - Wetlands Delineation/Determination
    U.S. Army Corps of Engineers
    Team New Orleans
    504.862.2201
  - Vicksburg District
    601.631.5000